User Manual

co-located or operating in conjunction with any other antenna or transmitters within a host device,
except in accordance with FCC multi-transmitter product procedures.
The installation of the transmitter must ensure that the antenna has a separation distance of at least
30 mm from all persons or compliance, and it must be demonstrated according to the FCC SAR
procedures.
6.3 Canada
The module has been certified for use in Canada under Innovation, Science and Economic
Development Canada (ISED, formerly Industry Canada) Radio Standards Procedure (RSP) RSP-100,
Radio Standards Specification (RSS) RSS-Gen and RSS-247. Modular approval permits the
installation of a module in a host device without the need to recertify the device.
6.3.1 Labeling and User Information requirements
Labeling Requirements (from RSP-100, Issue 11, Section 3): The host product shall be properly
labeled to identify the module within the host device. The Innovation, Science and Economic
Development Canada certification label of a module shall be clearly visible at all times when installed
in the host product, otherwise the host device must be labeled to display the Innovation, Science and
Economic Development Canada certification number of the module, preceded by the word “Contains”,
or similar word expressing the same meaning, as follows:
Contains IC: 8352A-23A00L83
User Manual Notice for License-Exempt Radio Apparatus (from Section 8.4 RSS-Gen, Issue 4,
November 2014): User manuals for license-exempt radio apparatus apparatus shall contain the
following or equivalent notice in a conspicuous location in the user manual or alternatively on the
device or both:
Blum 23.A00L83 RF Module Manual 1.0.2
Page 14 of 17