Manual
Table Of Contents
- Refrigerated and Heating Circulators, F12-MA...FPW50-MA
- Operating manual
- Intended use
- Operator responsibility – Safety recommendations
- Operating instructions
- Safety notes for the user
- Operating controls and functional elements
- Preparations
- Operating procedures
- Setting of temperatures
- Safety installations, warning functions
- Menu functions
- Troubleshooting guide / error messages
- Electrical connections
- Remote control
- JULABO Service – Online remote diagnosis
- Cleaning / repairing the unit
Operating procedures
34
Draining
• Turn off the circulator and cooling machine.
• Hold the venting grid, pull out and remove.
• Slide a short piece of tube onto the drain
port (23) and hold it into a pail.
• Unscrew the drain tap (22) and empty the
unit completely.
Tighten the drain tap.
6. Operating procedures
6.1. Power connection
Caution:
• Only connect the unit to a power socket with earthing contact (PE –
protective earth)!
• The power supply plug serves as safe disconnecting device from the line
and must be always easily accessible.
• Never operate equipment with damaged mains power cables.
• Regularly check the mains power cables for material defects (e.g. for
cracks).
•
We disclaim all liability for damage caused by incorrect line voltages!
Check to make sure that the line voltage matches the supply
voltage specified on the identification plate.