Manual
Table Of Contents
- Refrigerated and Heating Circulators, F12-MA...FPW50-MA
- Operating manual
- Intended use
- Operator responsibility – Safety recommendations
- Operating instructions
- Safety notes for the user
- Operating controls and functional elements
- Preparations
- Operating procedures
- Setting of temperatures
- Safety installations, warning functions
- Menu functions
- Troubleshooting guide / error messages
- Electrical connections
- Remote control
- JULABO Service – Online remote diagnosis
- Cleaning / repairing the unit
Operator responsibility – Safety recommendations
22
Environmental conditions according to IEC 61 010-1:
Use only indoor.
Altitude up to 2000 m - normal zero.
Ambient temperature: +5 ... +40 °C
Air humidity:
Max. rel. humidity 80 % for temperatures up to +31 °C,
linear decrease down to 50 % relative humidity at a temperature of +40 °C
Max. mains fluctuations of ±10 % are permissible.
Protection class according to IEC 60 529 IP21
The unit corresponds to Class I
Overvoltage category II
Pollution degree 2
Caution:
The unit is not for use in explosive environment
Standards for interference resistance according to EN 61326-1
This unit is an ISM device classified in Group 1 (using high frequency for internal purposes)
Class A (industrial and commercial range).
2.5. Cooling water connection
Cooling water pressure (IN/OUT) max. 6 bar
Pressure difference (IN - OUT) 3.5 to 6 bar
Cooling water temperature < 20 °C