User Manual

Menu functions

9.9. MENU IN/OUT – Analog inputs/outputs (Option)

ALARM

REG+

E-PROG

STAND-BY



In order to use the analog inputs and outputs, the circulator must be

equipped with the electronic module available as option.

Order No. 8 900 100 Electronic module

This submenu enables setting of the input and output values for the

programmer input and the temperature recorder outputs of socket REG+E-

PROG.

The >STAND-BY< input and the >ALARM< output are configurable.

Menu level 1



 Press the key if parameter is to be retained. Correction function for

parameters or values (prior to OK).

Level 2

Level 3

Parameter level



• The parameter flashes,

switch by pressing

and

ACTINT [°C]

internal actual temperature value

(bath temperature)

ACTEXT [°C]

external actual temperature

value (external sensor)

S-POINT [°C]

active setpoint temperature

POWER [%]



• Integer digits flash, set by

pressing

• Decimal digits flash, set by

pressing



• The parameter flashes,

switch by pressing

and