Manual

Recirculating coolers

6.3. Setting the setpoint temperatures

Set the setpoints before or after starting the unit.

Press the setpoint keys (E, F, G, H) to set a value and

press the Enter key to store the value.

The values will stay in memory when the recirculating

cooler is powered down.

6.3.1. Setting the temperature

Example: Setting the bath temperature

ACTUAL

SET

ACTUAL

SET

 Press the setpoint key

The indicator light blinks and the value previously set

appears on the MULTI-DISPLAY (LED) (example: -

10.8 °C)..

 Use the cursor keys to move left or right on

the display until the numeral you wish to change is

blinking.

 Use the increase/decrease arrows to change

the selected numeral (-, 0, 1, 2, 3, ... 9).

 Press enter to store the selected value

(example: -8.0 °C).