User guide

ME
37

9. Set MENU Program to >Mode Forcier<
See page 32

10. Start the forcing test
As factory-setting the „Forcing test 60 °C“ is stored
Measuring cycle:RUNS 1 flow (48 h)
Warm phase W-TEMP 60 °C
Duration W-TIME 24 h
Cool phase C-TEMP 0 °C
Duration C-TIME 24 h
Setting of other values see page 32 „ FORCING-Test Program “
Start-Menu

 Press the key if a parameter is to be retained.
Correction function for parameters or values (prior to OK)
Menu level 1

> RUNS < Number of repetitions of the warm/cool phase 1 ... 10
> GO < Start the forcing test (NOW)
Level 2 Parameter level Level 2
 
 
11. Program sequence
A program sequence is described from page 38 on.