Owner manual

Menu functions
40
8.3. Start of a profile
The start menu of the integrated programmer allows calling up and defined
starting of one of six previously stored temperature profiles. The profiles are
started manually or via the integrated timer.
>Programmer Start
M
ain menu
Control
Int.Programmer
>Start Profile 0
at Step 0
Runs 1
Profile End Stdby /SetpPG/Setp 1/Setp 2/Setp 3
Start no /yes/time
1
ESC
ESC
>
hour.min 11:15
Day.Mon 11.12
Year 2004
Start no /yes
1
>Programmer Start
Example: 11:15
1. Use the keys to select the menu item.
2. With the keys select the parameter (parameter blinks)
or
use the numeral keypad to enter the numbers (number segment
blinks).
3. Press enter to store the new parameter or value.
 If the parameter time is selected, a further submenu opens for
setting the start time.
Possible parameters:
Start Profile 1 to 5
Select the profile that should be started.
at Step 1 to 60.
Select the section with which the profile should be started.
Runs 1 to 99
Select the number of profile repetitions.
Start no / yes  (manual start)
or
time  (via integrated timer)