Instruction Manual
Table Of Contents
- Svenska
- SÄKERHETSANVISNINGAR
- TEKNISKA DATA
- MONTERING
- underhåll
- SIKKERHETSANVISNINGER
- TEKNISKE DATA
- montering
- vedlikehold
- PRZEPISY BEZPIECZEŃSTWA
- DANE TECHNICZNE
- MONTAŻ
- koncerwacja
- SAFETY instructions
- TECHNICAL DATA
- INSTALLATION
- maintenance
- SICHERHEITSHINWEISE
- TECHNISCHE DATEN
- MONTAGE
- Pflege
- TURVALLISUUSOHJEET
- TEKNISET TIEDOT
- ASENNUS
- Huolto
- CONSIGNES DE SÉCURITÉ
- CARACTÉRISTIQUES TECHNIQUES
- MONTAGE
- entretien
- VEILIGHEIDSINSTRUCTIES
- TECHNISCHE GEGEVENS
- MONTAGE
- Onderhoud
ENGLISH
9
ENGLISH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use!
• Be sure to connect all mains leads, including the earth lead, correctly. Contact an electrician or
your dealer if you are unsure about how to carry out the installation.
• Do not use the lamp post if the power cord and/or plug are damaged in any way. For safety
reasons, the power cord must only be replaced or repaired by an authorised service centre.
Consult your dealer.
TECHNICAL DATA
Mains voltage
220 – 240 V/50 Hz (110 V/60 Hz)
Protection rating
IP44
Rated output
100 W
Bulb socket
E27 (VDE or UL)
Safety class
I
INSTALLATION
Features and uses
• Rugged and durable lamp housing in aluminium alloy
• Electrostatic coating and thermostatic tempering
• Attractive design and corrosion resistant
• Night lighting for car parks, lawns, paths, etc.
• Unpack all the parts and inspect them
for any shipping damage. Contact your
dealer if any part is damaged or
missing.
• Do not connect the lamp post to the
mains until the installation is completed.
• Connect the power cord to the terminal.
• Fit the lamp on the post using the
accompanying screws.
• Remove the nuts and open the upper
lamp cover.
• Remove the protective glass cover and
screw a light bulb into the lamp holder.
Do not exceed the specified rated
output.
• Put the protective glass cover and the
upper cover back in place.
• Be sure to connect the earth lead
correctly.