User Manual

Attaching a zipper

CAUTION:

Turn OFF the power switch when replacing the presser foot.

Install a zipper attaching foot.

Turn OFF power. Loosen the screw in the presser

foot, and attach the zipper attaching foot from the

far side of the presser foot.

Turn the presser position selector

screw to move the presser foot until the

correct needle entry point is obtained.

When sewing the left-hand side of the zipper,

move the presser to the left. When sewing the

right-hand side of it, move the presser to the right.

■

Changing the sewing direction

1. Keep the needle at its down position.

2. Lift the presser foot, and turn the material in a de-

sired direction.

Screw in the

presser foot

Presser bar

Presser position selector screw