User Manual

Winding the bobbin

CAUTION:

Turn OFF the power switch when opening the slide plate.

Installing the thread guide

❶

Raise the support rod fully, turning slightly until the posi-

tioning latches engage.

❷

Set the large spool over the anti vibration cone, or

❸

Set the household-type thread onto the spool pin and then

insert a spool cap in place.

❹

Pass the thread coming from the spool on the thread

guide pin (rod) just above the spool.

❸

❹

❷

❶

Bobbin winder guide

Bobbin thread

winding shaft

Bobbin presser

Positioning latches

Take out the bobbin case.

Bring up the needle. Opening the slide plate, take out

the bobbin case.