Operation Instruction

58
Setting forth/single
Trim thread travel motor 1.0-100.0 1.0
Flat knife grip delay (ms) 1-350 1
Back a knife speed ratio 10-100 100
Loose line start mode Angle/Delay Angle
Loose line angle 0-999 850
Knife section speed Yes/No No
The first knife length
0.000-
100.000
0.000
The knife first speed(mm/s)
0.000-
100.000
0.000
The knife second
speed(mm/s)
0.000-
100.000
0.000
Power-on
Settings
Stitches to the up position
when powered on
Yes/No Yes
Frame automatic back to the
origin
Yes/No No
Motor lock when powered
on
Yes/No Yes
Presser foot lift when
powered on
Yes/No Yes
Other
Setting
Air-pressure detection Yes/No No
"Yes" means stoping and
alarming if the air pressure is
low when working.
Whether to circular
processing
Yes/No No
"Yes" means the same file is
processed in a cyclic manner
after startup