Operation Manual

91
7
Setting the pivot height
You can set the presser foot height in the case of using the pivot function.
Setting range: 2.0 - 6.0 mm (in increments of 1 mm)
* Default setting is 2.0 (mm).
Example) To set the pivot height to 3.0 (mm)
The pivot height has now been set to 3.0
(mm).
* The setting is memorized even when the machine is
turned off and on.
Press
.
Press
.
Several seconds
later.
Press
.
Press or
to select
.
Then, press
.