Operation Manual

60
Inserting zippers
* Make sure to use center needle position
(Stitch pattern No. Direct 1).
(right) (left)
2
Attach the zipper presser foot (B) to the
machine.
When sewing the left side of the zipper, place the zip-
per under the right portion of the zipper presser foot.
When sewing the right side of the zipper, place the
zipper under the left portion of the foot.
1
Use the standard presser foot (A) to sew.
Place the fabrics face-to-face. Check the runstitching
length and the length of the zipper to be inserted. Ma-
chine baste the zipper onto the fabrics.
Machine basting = zipper opening length + 1 cm
Machine basting ...
Stitch length “4”
Crotch end
Reverse stitch (1cm)
Runstitching ... Stitch length “Automatic”
Preparation before attaching zipper
Pattern No. Direct 1
Presser foot
Zipper presser foot
(B)
Zippers are set in two different ways: by inserting into
the side seam of the garment and by centering in posi-
tion.
Attention
Turn OFF the power switch
before replacing the presser
foot.
Fabric
(wrong side)