Operation Manual

– 33 –
Example) To assign the thread trimming function to the input port "i01"
1) Select function setting No. 12 with the operating procedure of function
setting procedures 1) through 3).
2) Press switch 󱀙.
3) Select a port (for example, "i1") to be set by pressing and switch-
es ❾.
4) Press switch 󱀙.
5) Select a function (for example, "Trm") by pressing and switches
❾.
6) Press switch 󱀙.
7) Activate the selected function by pressing and switches ❾.
8) Press switch 󱀙.
9) Finish function setting by pressing switch 󱀘.
n.
21
1i.
1i.
Tb
MT r
L
0
L
0
to
H
0
0i.