Instructions

User Manual JUICE BOOSTER 2 [EL-JB2, EA-JB2] version 1.07 EN 7
WARNING
Mortal Danger
• Never leave packaging material lying around. Plastic film, plastic bags and other packaging
components could become hazardous playthings in the hands of children. There is a danger
of suffocation!
• First check the packaging and the device for possible damage during shipping. Always
inspect the device for defects before installing and setting it up. Do not operate the device if
you notice irregularities or damage to the housing, cables, plugs or sockets.
• Users must comply with their applicable national regulations regarding the operation,
functional testing, repair and maintenance of electronic devices.
• Only connect the JUICE BOOSTER 2 to a correctly installed and properly grounded power
socket.
• If the feed line has no earth conductor and you operate the JUICE BOOSTER 2 in “NORWAY”
or “EARTH OFF” mode, a subtle tingling may be felt on the housing as is typical for the
technology. This is caused by leakage current in the mA range and is both normal and non-
hazardous.
• The power rating of the JUICE BOOSTER 2 must match that of the power supply network.
• Protect your device from standing water, excessive dust, corrosive liquids and fumes. Make
sure that the device is not lying in a puddle and that water cannot collect on or around the
device (e.g. if it rains or if there is melting snow).
• Do not operate the JUICE BOOSTER 2 in the immediate vicinity of a heat source.
• During the charging process, regularly check the temperature of the power sockets and
cables. If they are hot, stop charging immediately. “Hot” is when you cannot keep your hand
around the cable or connector for more than 20 seconds.
• If the JUICE BOOSTER 2 is exposed to sunlight for long periods of time or is operated in a hot
environment, the housing may feel hot. This is a sign of excellent heat dissipation and is not a
problem. In such cases, hold the device by the cable or the rubber caps.