Instructions

User Manual JUICE BOOSTER 2 [EL-JB2, EA-JB2] version 1.07 EN 18

13. Operating instructions

13.1. Starting conditions

• Park your vehicle near a power outlet in accordance with Point 10.2 or 10.3.

• Ready the JUICE BOOSTER 2.

• Have a JUICE CONNECTOR safety extension cable ready if necessary.

DANGER

Electric shock hazard / Fire hazard

• Make sure that all cables being used are fully unwound and that there are no loops. Failure to

do so can result in overheating. This can cause the insulation to melt and start a fire.

13.2. Starting the charging process

• Select the correct JUICE CONNECTOR safety adapter for the power outlet.

• Connect the JUICE CONNECTOR safety adapter to the JUICE BOOSTER 2.

Mechanical cams only allow connection in the correct position (orange dots for correct

alignment). Push together until a click is heard.

• Plug the mains adapter into the power outlet.

• Take note of the following status indicators:

The LED(s) Duration Process

All flashing yellow

(A)

2 secs. Device initialization,

charge intensity is being detected by the

device

Flashing yellow

(B)

30 secs. The device displays the selected mode

(MODE)*

Light up green at the

amp value

(C)

permanent Amp value set, device is ready to charge

(This status is also displayed once the

vehicle charging has been properly

completed)

Flashes green and yellow

alternately at the

amp value

(B and C)

30 secs. Amp charge value and selected mode

are in the same position, hence the dual

display