User's Manual

23
Cancel/Expedite Mode
The Panel can be programmed as a Cancel or Expeditor Panel and cannot be
both at the same time. A Cancel Panel is used by the Wait Staff to cancel their
pages after picking up an order. A Expeditor Panel is used by an Assistant or
Chef to page the Wait Staff. To program:
1. Press and hold PROG on the Controller for 2 seconds.
2. LED’s 1-7 will be ON.
3. Press button 1.
4. LED’s 1-2 will light with the current choice blinking;
1= Cancel, 2=Expedite.
5. Press button 1 (Cancel) or 2 (Expedite) as needed.
6. Press ALL CALL to return to programming mode.
7. Press ALL CALL again to exit programming mode.
Number of vibrations
The number of vibrations sent from the Controller, Cancel/
Expeditor Panels to the Pagers can be locked by the user. If
locked, it will always send the same number of vibrations to
the Pagers. This can be used to identify which panel
(Controller, Cancel or Expeditor) sends the page. Each Panel
can be set for a specific number of vibrations. Factory setting
is 1 vibration. If set to 2 or 3 vibrations, the X2 or X3 buttons on
the Panel are disabled. To program:
1. Press and hold PROG on the Controller Panel for 2 seconds.
2. LED’s 1-7 will blink.
3. Press button 2.
4. LED’s 1-3 and 6-8 will light with the current choice blinking.
5. Press button 1, 2 or 3 to select the number of vibrations for the Controller.
6. Press 6, 7 or 8 for the number of vibrations for the Cancel/Expeditor Panel.
Pressing 6=1, 7=2, 8=3 vibrations.
7. To return to programming mode press ALL CALL.
8. To exit programming mode, press ALL CALL again.
Transmit Power
Power can be adjusted as needed. The Controller is set at
the maximum 2.0 Watts at the factory. To adjust:
1. Press and hold PROG on the Controller Panel for 2 seconds.
2. Led’s 1-7 will blink.
3. Press button 7.
4. LED’s 1-5 will light with the current choice blinking.
1=0.1Watts 2=0.4Watts 3=0.82Watts 4=1.4Watts 5=2.0Watts
5. Press button 1-5 to select the transmit power of the Controller.
6. To exit programming mode, press ALL CALL.
Transmit Power Number Of Vibrations Cancel/Expedite Mode
Draft Copy