User's Manual

20
Using the Cancel Panel
• The Cancel Panel is used to cancel (end) pages
sent from the Controller.
• After the Controller sends a page, the Wait Staff
must cancel (end) the page by pressing the
Pager number button on the Cancel Panel.
• If not canceled, the Controller will continue to
page the Pager.
• The delay between repeat pages is 40 seconds
(factory setting) and can be adjusted by changing
the program settings.
• When a page is sent;
1. The Pager number on the Controller and the Cancel Panel will light for
40 seconds (factory setting).
2. If the page is not canceled within 40 seconds, the panel light will blink
and send a 2nd page to the Pager.
3. If the page is not canceled within 40 seconds, the Controller will send a
3rd page and send a single vibration and Pager number message to
the Managers Pagers.
4. If the page is not canceled within 40 seconds, The Controller repeats a
page to the Wait Staff Pager and Managers Pager every 40 seconds
until the page has been canceled.
Using a Managers Button
• The Managers Button can be connected to a Controller for paging the
Manager from an alternate location.
• Managers Button when press, sends a “00” page to
the Managers Pagers.
Using the Managers Button Using the Cancel Panel
Draft Copy