User's Manual

14
EXPANSION REMOTE
Powering the Kitchen Controller
1. Connect the Power Adapter to the Kitchen Controller and plug it into a
120VAC outlet.
2. The Controller LED’s will light in a sequence, TRANSMIT light will light
and the POWER light will flash.
3. After several seconds, the TRANSMIT light turns off and the Kitchen
Controller is ready for use.
4. The POWER light continues to blink while the system is powered.
Connecting the Cancel or Expeditor Panel
1. The Cancel/Expeditor Panel must be
connected to the Kitchen Controller Panel
before connecting power.
2. Connect the Cancel/Expeditor Panel to the
Kitchen Controller Panel using the 25’ (7.6m)
the RJ12 Phone Cord supplied.
3. Connect the cable from the gray “REMOTE”
jack of the Controller Panel to the
gray “REMOTE” jack of the
Cancel/Expeditor Panel.
4. Connect Power to the Kitchen
Controller Panel.
Antenna
12VDC
Power
Adapter
AC Outlet
110-240VAC
Right Side
View
Connecting the Cancel or Expeditor Panel Powering the Transmitter
Cancel/Expeditor
Panel With
Buttons 1-20
Kitchen Controller
Panel with
Buttons 1-20
Draft Copy