User's Manual

12
Installing the Kitchen Controller and Cancel/Expeditor Panel
• Mount on a wall, clamp to a shelf or let it sit
on any flat surface.
• Mount as high as possible from the floor
with the antenna tip at least 18” away
from any metal. This includes;
counters, backsplash, etc.
• Walls, pipes, ducts, mirrored glass, etc.
may weaken or misdirect transmitted
signals.
• Locate away from liquids or extreme
heat.
• The Antenna must be mounted
vertically.
• Mounting hardware is user supplied.
Select hardware that will ensure a safe
installation.
• Requires a 110-240 VAC 50-60Hz outlet for power.
• Warning - All connection cables (if required) and Antenna must be
connected before applying power.
Installing the Transmitter and Cancel/Expeditor Panels
Draft Copy