User's Manual

IntelFlex Controller Highlights:

• Built in transmitter for paging Vibe/ Tone/ Flash, Numeric and Alphanumeric

Pagers.

• Send canned and user defined messages to Alphanumeric and Numeric Pagers.

• Adjustable RF power settings from 0.1-2.0 Watts.

• Time stamped events and an exportable Log (.txt format) are available.

• 6 expansion slots allow for increasing capabilities.

• “Monitor Before Transmit” eliminates missed pages caused by surrounding

equipment.

• Queues up to 32 messages with priority.

• Supports past and present JTECH Transmitter functions and more:

•Out-of-Range: Warn when the Pager is moved out of transmission range.

• Range Test: Measure, establish and adjust transmitter range.

• Search Mode: Find lost Pagers.

• Group and Dynamic Group Paging: Page several Pagers with a single entry.

• Call4Sure: Cell phone paging.

• Replace Pager: Change Pager numbers as needed.

• Pager Voice: Turns Pagers voice alerts ON or OFF.

• Change alert vibration settings.

Range:

•Maximum transmitter range is 1.5- 2 miles (2.4 – 3.2km).

• Range will vary, depending on the equipment location and surrounding

environment.

• Increase range with an optional Magnetic Mount Antenna, 6ft Antenna or

Extended Range Kit (FCC license required).

USB and Ethernet Connection:

•USB 2.0 port for Flash Drive software upgrades or keyboard support.

• IP addressable Ethernet port for paging support “online” and software upgrades.