User's Manual
11
Connect your system for testing.
1. Connect the Antenna and point upward (vertical).
2. Connect the USB port to USB keyboard and RS232 port to PC.
3. Plug in the AC Power Cord into the Adapter.
4. Plug the Adapter into the IntelFlex Controller.
5. Plug the AC Power Cord into a 120VAC outlet.
6. When powered and ready, the Controller will respond to commands sent via the
RS232 port. The RS232 protocol is defined on page ___ of this manual. Pages can also
be sent via telephone or changes in contacts if the unit is so equipped. See page___
and page ____ of this manual:
• Initialization Process...
• Base Station Connecting….
• Receiving config data….
• Enter Pager Number:
7. When PC application software shows “Enter Pager Number:” comment appears, the
Controller is ready for use.