User's Manual

(2) RESTTX Option Setting
The option setting must be done prior to powering up.
As shown in the photo above, there are two option switches inside the battery tray. The
switch on the left is to select a facility among the 16 restrooms assigned in the PC
program, and the one on the right is to add additional options.
The three left pins of the switch on the right are for setting up the use number for
transmission, and the last pin is for the manager option (ON/OFF)
As shown in the photo above, default set of each switch is “0000”, “0000”.
To assign a certain facility among the 16 restrooms, make following combinations by
switching each pin of the left switch.
“0000” (#1), “0001” (#2), “0010” (#3), “0011” (#4), “0100” (#5), “0101” (#6), “0110” (#7),
“0111” (#8), “1000” (#9), “1001” (#10), “1010” (#11), “1011” (#12), “1100” (#13), “1101”
(#14), “1110” (#15), “1111” (#16)
To set up the use number for transmission, make following combinations by switching
the left three pins of the right switch. “000” (#1), “001” (#20), “010” (#40), “011” (#60),
“100” (#80), “101” (#100), “110” (#120), “111” (#140)
The 4
th
pin from the left of the switch on the right is to turn on or off the manager
option. “0” is “off”, and “1” is “on”.