User's Manual

Thank you for purchasing Handheld Table Scout.
We are confident our cutting edge products and first rate service will satisfy your needs for years
to come. Please read the manual thoroughly to familiarize yourself with the procedures
for proper care of your system.
1. To Page
1)To page the pager,
Press the pager number and then press Enter key
; Enter Pager no. >> Press Enter key >> Sending
Cf. Preset and Message menu options shall be programmed OFF
if you want to page the pager only without sending any messages.
Cf. Example to page the pager no. 7
Action Transmitter display
-----------------------------------------
Press “7” No>7
Press “Enter” Sending
AM 10:00 (Current time)
2)To send the Preset or Message(Numeric number)
Table scout is able to send one of them, Preset or Message (max. 12 Numeric
numbers) to the pager as described below
(1) To send the Preset (PRESET/PRE / Default: C )
Preset menu (PRE) shall be set ON and Message(MSG) menu shall be set
OFF prior to use the preset Menu.
- Press the pager number and press Enter key,
- Enter the preset number and press Enter key
; Enter Pager no. >> Enter key >> Enter one of the preset number 1~4 >>
Enter key >> Sending
Cf. Example to send the preset no. 3 to the pager no. 7
Action Transmitter display
-----------------------------------------
Press “7” No>7
Press “Enter” PRESET