User's Manual


 10)SETBaseID
  Withthisfeature,youcansetuptheBaseIDofeachtransmitter.

  SettingtheBaseID
 Atthe“SETBaseID”menu,“SYSTEMBASEID:”isdisplayed.
 InputtheBaseIdandthenpress“ENTER”key.

 11)GROUPCALLID
  Withthisfeature,youcansetuptheGROUPCALLID.

  SettingtheGroupCallID
 Atthe“GROUPCALLID”menu,“GROUPCALLID(1‐2):”isdisplayedandyou
canselectamong1‐2.
 IfyouwanttoinputGroupID#1,press“1+ENTER”andthen“SetGroupID
#1”isdisplayed.
 InputGroupCallID#1andthenpress“ENTER”key.
 GroupID#2canbesetassamewayasGroupID#2.

 12)OUTOFRANGEID
  Withthisfeature,youcansetupOutofRangeID.


  SettingOutofRangeID
 Atthe“OUTOFRANGEID”menu,“SetOutofRangeID:”isdisplayed.
 InputoutofrangeIDandthenpress“ENTER”key.

 13)SETBAUDRATE
  Withthisfeature,youcansetupthebaudrateyouwant.

  SettingBaudRate
 Atthe“SETBAUDRATE”menu,youcanselectthebaudrageusing“#”key.
BaudRateList
(1) 512BPS
(2) 1200BPS
