User's Manual

DefaultAlertType‐Vibeonly
DutyAlert‐OFF
OutofRange–OFF
BaudRate–1200BPS
TransmissionFrequency‐11kindsselectable
ReceptionFrequency‐457.5750MHzfixed


3.SystemProgramming(TransmitterVersion1.01A)

 To enter programming mode, press the “SETUP” button and enter the password
“2580”followedby“ENTER”Ifthepasswordisaccepted,thedisplaywillshow“use*
toscrolltomenuoptions”

 1)SetCurrentTime
 Atthe“SetCurrentTime”menu,setthehourthenpress“ENTER”key.
 Settheminutesandpress“ENTER”key.
 Usethe“#”keytoselectAMorPM
 After the time is set, press the “ENTER”, and “Time Saved” willshowon
display. If the time is not correct,press the “CANCEL” key twicetoexitthe
systemprogrammingmenu.

 2)SetSleepShutdownTime(FactoryDefault:OFF)
  This system has an “ALL SLEEP” function that turns off all battery pagers at once
automatically.

  Toturnthisfeatureoff
 Press“#”keytoturnthesleepshutdown“OFF”
 Press“ENTER”togobacktothemainmenu.

  Tochangetheshutdowntime
 Press“#”keytoturnthesleepshutdown“ON”
 Setthehourthenpress“ENTER”key.
 Settheminutesandpress“ENTER”key.
 Use“#”keytoselectAMorPM.
 After the time is set, press the “ENTER”, and “Time Saved” willshowon