Data Sheet

16
11.6 Operational Environment Conditions :
Products are designed to work for electronic products under normal environmental
conditions (ambient temperature, humidity and pressure). Therefore, products have
no problems to be used under the similar conditions to the above-mentioned.
However, if products are used under the following circumstances, it may damage
products and leakage of electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).
- In an atmosphere containing combustible and volatile gases.
- Dusty place.
- Direct sunlight place.
- Water splashing place.
- Humid place where water condenses.
- Freezing place.
If there are possibilities for products to be used under the preceding clause, consult
with Leetek before actual use.
As it might be a cause of degradation or destruction to apply static electricity to
products, do not apply static electricity or excessive voltage while assembling and
measuring.
11.7 Input Power Capacity :
Products shall be used in the input power capacity as specified in this specifications.
Inform Leetek beforehand, in case that the components are used beyond such input
power capacity range.
CAUTION
PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS.
This equipment may cause radio interference, and may not be used for personal
safety.
Please make sure that your product has been evaluated and confirmed from the
aspect of the fitness for the specifications of our product when our product is
mounted to your product.
All the items and parameters in this product specification/datasheet/catalog have
been prescribed on the premise that our product is used for the purpose, under