Data Sheet

ManualsBrandsJTECH an HME ManualsElectronicsLegacy Converter

9-3. Protocol and Data Format for Module Configuration

Note that the configurations for the Module as shown are: Delay to Transmit = 000(sec),

Paging Baud Rate = 1200(bps), Paging Frequency = 457.5750(MHz).

9-4. Protocol and Data Format for Module Data Read

12345678910

FF FF FF 06 52 31 03 50 31 0D

HEX

ASCII

CODE

[CR]R0[ETX]P0[ACK]

START

(Preamble)

Receiver On/Off

R0 : OFF

R1 : ON

Repeater On/Off

P0 : OFF

P1 : ON

Separator

[Function]

01 : Non Priority Alert for Numeric Pager

02 : Priority Alert for Numeric Pager

03 : Non Priority Alert for Alphanumeric Pager

04 : Priority Alert for Alphanumeric Pager

05 : Configuration 1 (Base ID, Baud Rate, Freuqncy, etc)

06 : Configuration 2 (RX & Repeater Option On/Off)

07 : Data Read

123456789101112131415161718192021222324

FF FF FF 05 30 37 30 03 30 30 30 31 32 30 30 03 34 35 37 35 37 35 30 0D

50[CR][ETX]457570012000[ETX][ENQ]070

HEX

ASCII

CODE

START

{Preamble)

Paging Base ID

Delay to

Transmit in

Paging Baud Rate Paging Frequency

[Function]

01 : Non Priority Alert for Numeric Pagers.

02 : Priority Alert for Numeric Pagers.

03 : Non Priority Alert for AlphaNumeric Pagers.

04 : Priority Alert for AlphaNumeric Pagers.

05 : Configuration.

Separator

END

Separator