User's Manual

Note. After setting the initial EST Time, you can enter into the “EST Add Time”
Auto Decrease EST Time
 Every time you page the pagers, the EST Time will be decreased as much as
the EST incremental time.
10) SET Base ID
With this feature, you can setup the Base ID of each transmitter.
Setting the Base ID
 At the “SET Base ID” menu, “SYSTEM BASE ID:” is displayed.
 Input the Base Id and then press “ENTER” key.
11) GROUP CALL ID
With this feature, you can setup the GROUP CALL ID.
Setting the Group Call ID
 At the “GROUP CALL ID” menu, “GROUP CALL ID(1-2):” is displayed and you
can select among 1-2.
 If you want to input Group ID #1, press “1+ENTER” and then “Set Group ID
#1” is displayed.
 Input Group Call ID #1 and then press “ENTER” key.
 Group ID #2 can be set as same way as Group ID #2.
12) OUT OF RANGE ID
With this feature, you can setup Out of Range ID.
Setting Out of Range ID
 At the “OUT OF RANGE ID” menu, “Set Out of Range ID:” is displayed.
 Input out of range ID and then press “ENTER” key.
13) SET BAUD RATE
With this feature, you can setup the baud rate you want.