User's Manual

Default Alert Type - Vibe only
Duty Alert - OFF
Out of Range – OFF
Baud Rate – 1200 BPS
Transmission Frequency - 11 kinds selectable
Reception Frequency - 457.5750 MHz fixed
3. System Programming (Transmitter Version 1.01A)
To enter programming mode, press the “SETUP” button and enter the password
“2580” followed by “ENTER” If the password is accepted, the display will show “use *
to scroll to menu options”
1) Set Current Time
 At the “Set Current Time” menu, set the hour then press “ENTER” key.
 Set the minutes and press “ENTER” key.
 Use the “#” key to select AM or PM
 After the time is set, press the “ENTER”, and “Time Saved” will show on
display. If the time is not correct, press the “CANCEL” key twice to exit the
system programming menu.
2) Set Sleep Shutdown Time (Factory Default: OFF)
This system has an “ALL SLEEP” function that turns off all battery pagers at once
automatically.
To turn this feature off
 Press “#” key to turn the sleep shutdown “OFF”
 Press “ENTER” to go back to the main menu.
To change the shutdown time
 Press “#” key to turn the sleep shutdown “ON”
 Set the hour then press “ENTER” key.
 Set the minutes and press “ENTER” key.
 Use “#” key to select AM or PM.
 After the time is set, press the “ENTER”, and “Time Saved” will show on