User's Manual

- If the Default Msg is ON, preset default message will be sent.
- If the Default Msg is OFF, No Message will be sent.
(2) “Pager #” + “ENTER” + Numeric Message + “ENTER(SEND)”
- It’ll send numeric message to the pagers.
2) OPEN / BUS / CLEAR Button (This can be activated when “Button Select” is turned
to “Function”)
(1) OPEN / BUS
 Press “Table #” and then press “OPEN(BUS)”
 The data of table # will be transmitted and the Table # will be displayed onto
the “OPEN / BUS” setion
※ Max 9 Table # can be displayed onto the each section and Max 19 Table # can
be stored.
※ When the number of received Table # is over 9, you can scroll the table # by
pressing “OPEN” button shortly.
※ To remove the list of “OPEN” or “BUS”, press and hold the “OPEN” or “BUS”
button for more than 4 seconds.
(2) CLEAR
 Press “Table #” and then press “CLEAR”
 The data of Table # will be transmitted and remove the corresponding table
# on the both section, OPEN/BUS.
※ To remove the all the lists of “OPEN” and “BUS”, press and hold the “CLEAR”
for more than 6 seconds.
(3) EST
 Every time you press the “EST” key, the EST incremental time will be added
to the current EST time.
LEE TECHNOLOGY KOREA CO., LTD