User's Manual

Pans Included with This System
- Camera with Built-In Transmitter
- 2.4 GI-btAudioNldeo Receiver
-12V ACJDC Adapter for the Receiver
- 1.5V300 RIAAdapter for the Camera
- 1,5mAN ~ble
""
Parts of the Miniature Wireless Color Camera System
Parts of the Camera
1.Camers Lens
2. 12 p<:$IR LED
3.Antenna
4. PowerJack
5. Camera Stand
6. IR Auto Control for Night Vision
7. Mlcrophf)ne
8. Channel Switch
2
5
3
8
7
4
Installation
Toolsyou will need: Pencil,Drill, Drill Bits, Phillips.head
Screwdriver. Hammer
{
Installing Mounting Bracket (Camera Stand)
1. Select a mounting location. Use the mounting bracket as
a guide and mark the screw holeswith a pencil.
2. Align the bracket over the holes or wall anchors and tighten
the screws to secure the bracket to the wall or ceiUng.
Installing and Aligning the Camera on the
Mounting Bracket (Camera Stand)
1. Slide the camera into the camera holder,
2. Lineup mountingholesof the camera holderand
the bracket.
3. Insertthumb screw,adjust camera10desired angle
and tighten screw.
Rotating the Camera
Loosen up the Thumb Screw and adjust the camera 10
desired angle. then
lighten the screw.
,cr
~
."""'-"
.
'/'
"..,
'
,
'.' <
, . "
"-
,-
.,/
if ~
Attach Stand to
Mounting Surface