Datasheet
GH CONNECTOR
1.25mm pitch/Disconnectable Crimp style connectors
Emboss Tape
0.6
1.25
1.35
1.0
0.3
2.8
3.9
5.6
±0.1
±0.1
±0.1
±0.1
±0.1
±0.1
±0.05±0.05
Header
outline
0.6
1.25
1.35
1.0
0.25
2.7
3.7
5.4
±0.05
±0.1
±0.1
±0.1
±0.1
±0.1
±0.1
±0.05
Header
outline
Top entry type
Side entry type
7.3
4.25
4.35
7.15
2.1
2.3
4.8
0.850.6
0.4
0.8
mm
2
AWG#
SSHL-002T-P0.2 0.05∼0.13 30∼26 0.8∼1.0 23,000
Material and Finish
Phosphor bronze, tin-plated (reflow treatment)
Model No.
Applicable wire
Q'ty / reel
Insulation O.D.
(mm)
SSHL-002T-P0.2
Contact
Crimping
machine
Crimp applicator with dies
AP-K2N
MKS-L-10-3
−
MK/SSHL-002-02
−
APLMK SSHL002-02
−
Crimp applicator Dies
Applicator
Developed for PDP, LCD or small
electronics equipment.
This low insertion force type connector
realizes easier mating operation. The basic
concept of the contact part of this
connector is equivalent to the performance
proven SHL connector.
• Secure locking structure
• Contact lock structure
• Prevent deformation of contacts
• Clear engagement click sounds
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #26)
• Voltage rating: 50V AC, DC
• Temperature range:
-25˚C to
+85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/30m Ω max.
After environmental testing/50m Ω max.
• Insulation resistance: 100M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: Conductor size/AWG #30 to #26
Insulation O.D./0.8 to 1.0mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
Contact
RoHS compliance
Note: 1. Contact JST for gold-plates products.
2. This contact can be applied only for GH connector.
SSHL-003( )-P0.2 cannot be applied for GH connector.
PC board layout (viewed from component side) and Assembly layout
Note: 1. Tolerances are non-cumulative:
±
0.05mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
14