Datasheet

PAD CONNECTOR
2.0mm pitch/Disconnectable Crimp style connectors
Dual-row construction allows high density
mounting.
• Secure locking device
• Reliable contacts
• Insertion guide mechanism
• Polarizing boss
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #28 to #22
• Applicable PC board thickness: 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1
Certified LR20812
2.0
＋0.1
0
φ
0.7
＋0.1
0
φ
1.1
±0.05
1.6
±0.05
1.6
±0.05
2.0
±0.05
A
±0.05
2.0
±0.05
1.4
（15.4）
10.7
（11.0）
Circuit No.1
Even number
circuits
Odd number
circuits
＋0.1
0
φ
0.7
＋0.1
0
φ
1.0
Circuit No.1
±0.05
2.5
±0.05
2.0
±0.05
1.3
±0.05
2.0
±0.05
A
（10.0）
（12.4）
Even number
circuits
Odd number
circuits
Top entry type Side entry type
Note: 1. Tolerances are non-cumulative: ± 0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.
28
PC board layout (viewed from component side) and Assembly layout