Datasheet

332

Applicable for waterproof usage. This is

the wire-to-wire connector that is more

than grade 7 ingress protection of

JIS C 0920 (IEC 60529 IPX7).

• Waterproof grade

• Contained seal ring

• Solid rubber seal

• Double-spring construction

• Housing-to-terminal locks

• Inner-housing lock

Specifications –––––––––––––––––––

• Current rating: 3A AC, DC (AWG #22)

• Voltage rating: 100V AC, DC

• Temperature range: -40ûC to +85ûC

(including temperature rise in applying

electrical current)

• Contact resistance: Initial value/5m max.

After environmental testing/10m max.

• Insulation resistance: 800M min.

• Withstanding voltage: 1,000V AC/minute

• Applicable wire: AWG #26 to #22

0.13 to 0.33mm

Insulation O.D./1.4 to 1.6mm

• Waterproof grade: More than grade 7 ingress

protection of JIS C 0920(IEC 60529 IPX7)

* RoHS compliant products are published.

* Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog.

* Contact JST for details.

Standards ––––––––––––––––––––––

0 Recognized E60389

JWPF CONNECTOR

2.0mm pitch/Crimp style wire-to-wire connectors

30.2

JST

4 4

Assembly layout

332

PAGE 1
JWPF CONNECTOR 2.0mm pitch/Crimp style wire-to-wire connectors Specifications ––––––––––––––––––– • Current rating: 3A AC, DC (AWG #22) • Voltage rating: 100V AC, DC • Temperature range: -40ûC to +85ûC (including temperature rise in applying electrical current) • Contact resistance: Initial value/5m max. After environmental testing/10m max. • Insulation resistance: 800M min. • Withstanding voltage: 1,000V AC/minute • Applicable wire: AWG #26 to #22 0.13 to 0.33mm2 Insulation O.D./1.4 to 1.
PAGE 2
JWPF CONNECTOR Contact Applicable wire Model No. Receptacle contact Tab contact mm2 Tab contact AWG # SWPT-001T-P025 SWPR-001T-P025 0.13 ∼ 0.33 15.2 2.0 4.5 26 ∼ 22 Insulation O.D. Q'ty/ (mm) reel 1.4 ∼ 1.6 8,200 Material and Finish 7.5 Tab contact: Phosphor bronze, tin-plated (reflow treatment) Receptacle contact: Copper alloy, tin-plated (reflow treatment) RoHS compliance Note: Contact JST for brass products.