Installation Guide

VESSEL TOP INSTALLATION

GUIDE

Caution: Read all instructions carefully before starting the installation. Sink style, shape, cutout on top and vanity

may vary from the pictures below. For instructional purposes only.

INSTALLATION INSTRUCTIONS

Step 1: Step 2:

Step 3: Step 4:

Apply bead of quality sealant evenly

along the top of the vanity

Apply silicone sealant evenly along

the bottom of backsplash and wall

Place the bottom side of back splash with sealant

onto the countertop and check alignment of backsplash.

Adjust the leg levelers as needed

Carefully, install the vessel sink, mounting ring

and drain. See manufacturers instructions

PAGE 1
VESSEL TOP INSTALLATION GUIDE INSTALLATION INSTRUCTIONS Caution: Read all instructions carefully before starting the installation. Sink style, shape, cutout on top and vanity may vary from the pictures below. For instructional purposes only. Step 1: Apply bead of quality sealant evenly along the top of the vanity Step 3: Place the bottom side of back splash with sealant onto the countertop and check alignment of backsplash.
PAGE 2
IMPORTANT CONSUMER INFORMATION CARE AND CLEANING For best results in caring for your stone top, we suggest: • Always wipe off spills immediately. • Seal the stone top regularly with a good quality stone sealer. • Never use strong / abrasive cleaner. Always test your cleaning solution on unnoticeable areas before applying to the entire surface. • Wipe surfaces clean, immediately after applying cleaner. • Do not allow cleaner to sit or soak.