Installation Instructions

Vanity Cabinet

Assembly Instructions

This assembly instruction applies to V2421 and V3021

Parts included:

Cabinet Item

Qty

A Face Frame with Doors and Drawer Head

B Side Panel (Left and Right)

C Bottom

D Back Panel

E Toe Kick

Step by step

1. Check and count the items in the box before your installation. If you are short any pieces, stop and call the supplier. Otherwise, follow

the steps below.

2. Put the face frame (A) face down on a flat soft working surface (Figure 1).

Figure 1

3. Install side panels (Figure 2): insert right and left side panels (B) into the grooves of face frame (A) and align the cam lock connectors.

Lock the cam lock with a screwdriver by turning the screw 180 degrees clockwise (Figure 3).

Figure 2 Figure3

485 Commerce Dr.

Fall River, MA 02720

PAGE 1
485 Commerce Dr. Fall River, MA 02720 Vanity Cabinet Assembly Instructions This assembly instruction applies to V2421 and V3021 Parts included: Qty Cabinet Item A Face Frame with Doors and Drawer Head B Side Panel (Left and Right) C Bottom D Back Panel E Toe Kick 1 2 1 1 1 Step by step 1. 2. Check and count the items in the box before your installation. If you are short any pieces, stop and call the supplier. Otherwise, follow the steps below.
PAGE 2
4. Install the bottom (Figure 4): gently spread side panels and insert bottom panel (C) into the grooves of side panel (B) until it touches the face frame (A). B Figure 4 5. 6. Place Toe Kick (E) onto the side panels at the front base of the cabinet (Figure 5). Align the cam locks and lock them. Install the Back Panel. Put the back panel (D) at rear of side panel (B). Align it with the top of the side panels and lock each cam lock (Figure 5).