Installation Instructions

Step #10:Drawer Assembly
To secure the drawer bottom panel, use ¾ Drawer
Bottom Screws (O) and screw them into the pre-
drill holes on the bottom panel (Figure 10)
Repeat these steps for additional drawers.
Step # 11: Drawer Assembly
Install outer rail to the cabinet frame by pushing the
rails into the drawer rail holder. Use one flat head
screw (L) to fasten the front end of the rail to the
face frame (Figure 12)
Step# 12: Drawer Assembly
Gently slide the drawer box into the outer rail.
NOTE: Repeat these steps for additional drawers.
Figure 10
Figure 11