Installation Instructions

Step #4: Install Bottom Panel

Install the bottom panel (Figure 4): Gently spread

side panels and insert bottom panel (C) into the

grooves of side panels (B) until it touches the face

frame (A).

Step #5: Install Back Panel & Toe Kick

Install the back panel and toe kick (Figure 5):

Screw the cam lock pin (P) to the back side of the

side panels (B). Then put the back panel (D) at rear

of side panels (B). Align the holes on the back

panel with the cam lock pins of the side panels and

lock each cam lock cup. Install the toe kick (E) by

screwing the cam lock pins to the pre-drill holes on

the toe kick. Then plug the cam lock cup into the

holes on the side panel (B) then lock the cam lock

cups at both ends.

Step #6: Install Drawer Rail Holders

Install the drawer rail holders (Figure 6): Secure

each drawer rail holders (H) with ½” drawer rail

screws (N) using the predrilled holes on the back

panel (D). Repeat this step for additional drawers.

Figure 4

Figure 5

Figure 6