Installation Instructions

Step #8:

Install the toe kick: Using four ½” round head screws (R) secure the two plastic toe kick brackets (J)

flush to the side panels. Position the toe kick (E) in the center and secure it with four additional ½”

round head screws (R).

Step #9:

Install the corner brackets: To install the corner support bracket (H), carefully stand up the cabinet.

Using eight of ½” pan head screws (O), secure the corner bracket in each corner.

Step #10:

Install the door: Take cup hinges (I) and place them into predrilled holes in the door. Using two of ½”

flat head screws (P) per hinge, secure hinge to the door. After all hinges are secured to the door, place

the door on the frame stile with pre-drilled holes. Align the hinge with the hole and secure them with

5/8” round head screw (S).

Step #11:

Install the drawer rails: Drawer rails come in pair- left and right. Align the slot on the back of the drawer

rail (L) with drawer rail holder (K). Push the drawer rail in, so it becomes flush with the frame. Using

½” flat head screws (P) secure the drawer rail to the frame.