Installation Instructions

Step #5:

Install the bottom panel: Apply wood glue into the grooves of the side panels (B). Gently spread side

panels and insert bottom panel (C) into the grooves of side panels until it touches the face frame (A).

Step #6:

Place the back panel (D) on a flat surface face up. Install the drawer rail holders (K) in the pre-spotted

area on the back panel. Secure each of them with two ½” flat head screws (P)

Step #7:

Install the back panel: Apply wood glue to the back panel groove (D) and place it at rear of side panels

(B). Align it with top of the side panels. Using four metal brackets (N) and eight ½” flat head screws

(P) secure the back panel to the side panels.