Installation Instructions

Step #7: Drawer Assembly

Drawer assembly:

There are 4 predrilled holes on

the drawer box (G), align them with the predrilled

holes (Figure 7) on the drawer front (F) and fasten

the drawer front to the drawer box using the 1”

drawer box screws (N).

Step #8:

To install the drawer rails, first separate inner rail

from outer rail by pulling the drawer glide to the

open position. Then push on the black plastic

locking mechanism. Pull the inner and outer rails

apart (Figure 8)

Step #9:

Use two 1/2” round head screws (L) to screw the inner

rail to bottom side of drawer sides (Figure 9).

Figure 7

Figure 8

Figure 9