Installation Instructions

Step #1: Check & Count
Check and count the items in the box before
installation. If you are short any pieces, stop and call
your supplier. Otherwise, follow the steps below.
Step #2: Set-up
Put the face frame (A) face down on a flat soft
working surface (Figure 1). Use screw driver to
screw the cam lock pins (P) in the pre-drilled holes
on the frame.
Step #3: Install Side Panels
Install side panels (Figure 2): insert right and left
side panels (B) into the grooves of face frame (A)
and align the cam lock connectors.
Lock the cam locks with a screwdriver by turning
the cam lock cap (P) 180 degrees clockwise
(Figure 3).
Figure 1
Figure 2
Figure 3
A
A
P