Installation Instructions

Step #8:

Install the toe kick: Using 4 of the ½” round head screws (R) secure the 2 plastic toe kick brackets (J)

flush to the side panels. Position the toe kick (E) in the center and secure it with 4 additional ½” round

head screws (R).

Step #9:

Install the corner brackets: To install the corner support bracket (H), carefully stand up the cabinet.

Using 8 of ½” pan head screw (O) secure the corner bracket in each corner.

Step #10:

Install the door: Take cup hinges (I) and place them into predrilled holes in the door. Using 2 of ½” flat

head screw (P) per hinge, secure hinge to the door. After all hinges are secured to the door, place the

door on the frame stile with pre-drilled holes. Align the hinge with the hole and secure them with 5/8”

round head screw (S).

Step #11:

Install the drawer rails: Drawer rails are coming in pair- left and right. Align the slot on the back of the

drawer rail (L) with drawer rail holder (K). Push the drawer rail in, so it becomes flush with the frame.

Using ½” flat head screws (P) secure the drawer rail to the frame.