Installation Instructions

Tools needed for assembly:

Rubber Mallet Wood Glue Phillips Screwdriver

Step #1:

Check and count the items in the box before your installation. If you are short any pieces, stop and call

the supplier. Otherwise, follow the steps below.

Step #2:

Put the face frame (A) face down on a flat soft working surface. Apply wood glue on every groove.

Step #3:

Slide the side panels (B) into the grooves of face frame (A) and align them on the top.

Step #4:

After aligning the side panels to the top of the frame, secure them using two metal brackets (N) and

four ½” flat head screws (P)