User's Guide
©JRI 3
I. INTRODUCTION
The LoRa® SPY is a recorder capable of measuring 1 or 2 physical quantities (T / TH or other quantity depending
on the model) and transmitting by radio to monitoring software hosted on a platform. The radio transmission
uses the LoRa® long-distance network.
The LoRa® SPY (T0, T1 andT2) comply with EN 12830 and compatible with EN 13486 which
defines procedures for periodic verification.
a) Product contents
1 LoRa® SPY
1 User guide
b) Symbols
Do not use the device under conditions other than those described in the technical
characteristics
Risk of fire or explosion in the case of improper use:
- Recharging of the battery
- Short circuiting of the battery
If the device is used in a manner not specified by the manufacturer, the protection
provided by the device may be compromised.
II. INSTALLATION RECOMMENDATIONS
The LoRa® SPY is a recorder which communicates by radio with software hosted on a Web platform via the
LoRa® long-distance public network or private network using a LoRa® Gateway. To ensure optimal radio
transmission, a certain number of recommendations must be respected, as any wireless transmission is subject
to disturbances.
a) Sources of disturbances or attenuation
The presence of obstacles in the wave path around the LoRa® SPY or between the LoRa® SPY and
the Gateway in case of use (wall, furniture, people…) or near the antenna.
RECYCLING: do not dispose of in a refuse dump or waste disposal bin. Comply with existing legislation for disposal.
Power source: this device is powered by a 3.6VDC type AA lithium battery (§ ch. V).
CE LABELING: this device is certified to conform to European regulations for electrical safety, flammability, disruptive
electromagnetic emissions, and immunity to environmental electrical disturbances.
Opens www.jri-mysirius.com.
FCC ID : W4512267
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
In accordance with FCC requirements, changes or modifications not expressly approved by JRI could void the user's
authority to operate this product.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.