Installation Manual

The C-Bracket can be
use d if the doo r le af
frame is concave.
Ensure the width and depth of the door frame, door leaf (hollow
metal door) are enough to install the lock body. Also check if it is
possible to place the wires inside the door frame.
Ensure the double action door swings back to correct position
after use to make sure the electric dropbolt locks up quickly.
Therefore the hinge of the double action door is very important.
Check if the regulated power supply or controller can provide
the current draw (pull in: 0.9A/12VDC , holding: 0.3A/12VDC)
and that the voltage can be maintained during operation under
all circumstances.
General Installation Instructions:
Copyright
P-MU-EB-S Ver.J Published on 2011.08.22
© Gianni Industries, Inc. All Rights Reserved.
Adjustable Position Ball