Operating Manual
9/17
5.3. GPS specification
No.
Item Specification / Performance
1 GPS module Communication module Cinterion PHS8-P built-in GPS
module
2 Reception method 30ch simultaneous
3 Reception frequency L1 1575.42 MHz
4 Output NMEA-0183 compatible (V2.3)
5 Positioning method
Standalone
Standalone GNSS
6 Geodetic system WGS-84
7 Time UTC UTC
8 Receive sensitivity (N
ote 1)
Cold start: -138 dBm or less
5.4. WCDMA communication specification
No.
Item Specification / Performance
1
Terminal type name
Cinterion PHS8-P (Gemalto product)
2
Radio frequency
UMTS/HSPA+: Four band, 800/850/1900/2100MHz
3
Transmission output
(Note 2)
Class 3 (+16dBm min) for UMTS 2100, WCDMA FDD BdI
Class 3 (+16dBm min) for UMTS 1900, WCDMA FDD BdII
Class 3 (+16dBm min) for UMTS 850, WCDMA FDD BdV
Class 3 (+16dBm min) for UMTS 800, WCDMA FDD BdVI
4
Receive sensitivity
(Note 3)
-99 dBm or less (normal temperature)
5 HSPA specification 3GPP Release 6, 7
DL 14.4Mbps, UL 5.7Mbps
UE CAT. 1-12 supported
Compressed mode (CM) supported according to 3GPP TS25.21
2
6 UMTS Specification 3GPP Release 4
PS data rate – 384 kbps DL / 384 kbps UL
CS data rate – 64 kbps DL / 64 kbps UL
7 SMS specification Point-to-point MT and MO
Cell broadcast
Text and PDU mode
(Note 2 and Note 3) This device is a design assurance value of the single device, and the performance
of the device is guaranteed in the state of being fitted to the building machine.
Please check the communication status in the production environment before using it.
(normal
temperature)