Installation Guide

3
The JRL-113BT48 interface indicators are described in Table 1-2.
Table 1-2 JRL-113BT48 LED Indicators
Identity
Color
Status
Description
PWR
Green
Steady On
Power On
OFF
No Power Supply
CELL2
Green
Fast flash: 0.125s on,0.125s off
CELL 2 inactivated
Slow flash: 1s on,1s off
CELL 2 activated
CELL1
Green
Fast flash: 0.125s on,0.125s off
CELL 1 inactivated
Slow flash: 1s on,1s off
CELL 1 activated
ALM
Red
Steady On
Hardware alarm
OFF
No alarm
Technical Specification 1.4
1.4.1 Hardware Specification
Item
Description
LTE Mode
LTE TDD
LTE Frequency
Band48
Channel Bandwidth
10MHz, 20MHz per carrier
Output Power
30 dBm/antenna
Receive Sensitivity
-100 dBm
Synchronization
GPS
Backhaul
1 Optical (SFP) and 1 RJ-45 Ethernet interface (1 GE)
MIMO
DL 2 x 2 on each carrier
Dimension
310mm(H) x 239 mm(W) x 105 mm(D)
Installation Type
Pole, wall
Antenna
External 14dBi directional antenna
Power Consumption
Typical 60W, MAX 100W
Power Supply
Power adaptor, convert (90-305 VAC, 50/60Hz, 2.1A) to
54 VDC
(multi-national standards)
Weight
About 7.5kg
MTBF
≥ 150000 hours
MTTR
≤ 1 hour
NOTE:
1.The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on 5MHz
bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.