Installation Guide

1. Product Overview

Introduction 1.1

JRL-113BT48 is an advanced two-carrier outdoor eNodeB based on LTE TDD

technology. It is capable of operating in Carrier Aggregation (CA) or Dual Carrier (DC)

mode.

In CA mode, contiguous or non-contiguous channels are aggregated to provide up to 40

MHz bandwidth. This essentially doubles the downlink capacity with optional software

and CAT6/7 user equipment.

In DC mode, each carrier is treated as an independent cell, supporting 96+96 users, and

each supporting 10 or 20 MHz bandwidth. Using a JRL-113BT48 in DC mode simplifies

and streamlines the deployment of split sectors.

Features 1.2

Following are some of the key JRL-113BT48 features.

 Adopt the integration design of baseband and RF.

 Citizens Broadband Radio Service (CBRS) band covers with dual carrier.

 Based on 3GPP international standard TDD LTE technology; provide high speed

data service; support a maximum aggregation peak rate of DL: 220Mbit/s, UL:

56Mbit/s with 2x20MHz spectrum, using CAT 6/7 or higher users.

 Support flexible uplink and downlink time slot ratio: 1(2:2), 2(1:3), and high speed

data transmission.

 Support 10MHz/20MHz operation bandwidth

 96 concurrent users per carrier, 96+96 in DC mode.

 Support four-port antenna or two antennas with two-port.

 Support copper (RJ-45) and optical port backhaul, flexible to deploy.

 Support simple and convenient local and remote web management.

 Integration as required, easy to installation and deployment, accurate

coverage and improved network capacity.

 Support network management functions, which includes the management,